lunes, 15 agosto 2005
Dos monitores con una ATI Radeon 9000
Problema.
Quiere usar dos monitores al estilo Xinerama pero en el portátil.Debido a que es un portátil, no puedo usar otra tarjeta de video que no sea la que lleva integrada, por lo que no vale la forma en que procedí en otra ocasión, con un sobremesa con dos tarjetas de video (Vease blog anterior).
Solución.
Aquí está el xorg.conf resultante:
Section "DRI"
Mode 0666
EndSection
Section "ServerFlags"
Option "Xinerama"
EndSection
Section "Module"
Load "extmod"
Load "record"
Load "dbe"
Load "dri"
Load "glx"
Load "freetype"
Load "type1"
Load "xtrap"
Load "record"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/corefonts"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/encodings"
FontPath "/usr/share/fonts/freefont"
#FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/terminus"
FontPath "/usr/share/fonts/ttf-bitstream-vera"
FontPath "/usr/share/fonts/ukr"
FontPath "/usr/share/fonts/unifont"
#FontPath "/usr/share/fonts/util"
FontPath "/usr/share/fonts/artwiz"
FontPath "/usr/share/fonts/cronyx/100dpi/:unscaled"
FontPath "/usr/share/fonts/cronyx/misc/:unscaled"
FontPath "/usr/share/fonts/cronyx/75dpi/:unscaled"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "es"
Option "AutoRepeat" "500 5"
#Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "USBMouse"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "SynapticsTouchpad"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Edges" "1900 5400 1800 3900"
Option "Finger" "25 30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.02"
Option "MaxSpeed" "0.18"
Option "AccelFactor" "0.0007"
Option "SHMConfig" "on"
Option "UpDownScrolling" "on"
Option "Protocol" "ImPS/2"
Option "CorePointer" ""
EndSection
Section "Monitor"
#DisplaySize 310 230 # mm
Identifier "Monitor0"
VendorName "AUO"
ModelName "f03"
HorizSync 27.0 - 90.0
VertRefresh 40.0 - 60.0
Option "DPMS"
EndSection
Section "Monitor"
#DisplaySize 300 230 # mm
Identifier "Monitor1"
VendorName "AOC"
ModelName "LM520/LM520A"
HorizSync 30.0 - 63.0
VertRefresh 55.0 - 75.0
Option "DPMS"
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter connector 0"
# Driver "fglrx"
Driver "ati"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "LVDS, CRT"
Option "IgnoreEDID" "off"
Option "HSync2" "31.5 "
Option "VRefresh2" "20 - 60"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=4c66
Screen 0
EndSection
Section "Device"
Identifier "ATI Graphics Adapter connector 1"
# Driver "fglrx"
Driver "ati"
BusID "PCI:1:0:0" # vendor=1002, device=4c66
Screen 1
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter connector 0"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
SubSection "Display"
Depth 24
# Virtual 2048 768
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
EndSubSection
SubSection "Display"
Depth 16
# Virtual 2048 768
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "ATI Graphics Adapter connector 1"
Monitor "Monitor1"
DefaultDepth 24
#Option "backingstore"
SubSection "Display"
Depth 24
# Virtual 2048 768
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
EndSubSection
SubSection "Display"
Depth 16
# Virtual 2048 768
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
EndSubSection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
Screen "Screen0"
Screen "Screen1" RightOf "Screen0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "USBMouse" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
### EOF ###
Posted by at 5:34 PM in Gentoo
